The 9 advantages of...
1. Minimum weight.
Unit weight is only 650kg/m³. Plastering is unnecessary. It weighs only 1/6 if
compared to the weight of brick wall.
2. Optimal water-proof and humidity-proof.
The tests prove that if we use cement to make a tub by the panels and fill the
tub with water without surfacing with water-proof coating, the back surface of
the wall panels looks dry without any mark of water. Even under damp
circumstances there is no condensing water on the wall surfaces.
3. Minimum room occupancy.
If compared to 120 wall, this panel wall needs less room and you can have 1m²
more functional area for every 12 meter in length.
4. Strongest hanging force.
The hanging force for individual spots is above 40 kg. Nails and adhesives can
be applied for hanging.
5. Highest fire-proof class.
It can be fire-resistant for more than 4 hours and becomes Class A fire-proof
material.
6. Optimal features against shock and impact.
Due to their fitting structure and 3-in-1 composition, the panels are connected
by means of joggle joints hence the panel wall enjoys best anti-blast and
anti-bending performance, which excels brick wall.
7. Highest efficiency.
The panels can be easily installed and no brick and plaster are needed,
therefore the construction time can be shortened. It is also very convenient for
installing the related water and power systems. The efficiency of installing
panel wall is 8-10 times higher than that of building brick wall. In addition,
the panels can be reused in other places when they are removed.
8. Easy for installing and convenient for working.
The panels are easy to be carried and piled. No plastering and polishing are
needed.
Without producing much residues and wastes on site, there is little loss of
material.
It is convenient for workers transporting and carrying the panels as their
weight is only 1/6 of that of brick wall.
9. Thin wall with maximum height and width.
Due to their high strength and overall performance, the panels can be used as
division and partition wall even the wall is very high and wide. Only steel
structure should be used for fixing which is installed inside the wall and it is
unnecessary to add wall posts. The anti-blast performance is 1.5 higher than
that of brick wall.
