The composition of ...  

 

1. Pure sand

2. Fine gravel

3. Nylon fibres between 3 and 4cm

4. Industrial Cement

5. Vermiculita

6. Water

 

 

1. Pure sand

Natural organic material that keep a size of < 0,1 mm after sieve.

 

2. Fine gravel

Solid and compact material, homogeneous not porous massif dark grey stones.

The sizes are smaller than 0,5 cm with a structural function.

 

3. Nylon fibres between 3 and 4cm

 

 Technical specification of nylon 6,6 Rhodianyl Tech 

Weight 1.14 g/cm3
Nomination of diameter 3.3 Dtex(g/10km thread)
Diameter 18 microns
Length (mm) 13-21
Wire quantity (350g) 52 Million
Pull resistance 900 MPa
Module of Young 4.758 MPa
Density 214 Mpa
Melting point 260º C
Resistance against ultra-violet High
Alcalic resistance Very good
Profile Trilobal
Water absorption 4%
Elasticity (%) 45 - 95

               

          

Sensibility against chemical products : Alcalic resistance and resist against mixed acid.

This effective formule gives the guarantee for a perfect coherence between the components.

Through the fibres is the formule efficient against damage.

The nylon fibres prevent breaks and have the advantage of a thermical insulation, acoustic and imprenetrability.

 

Advantage of concrete mixed with nylon fibres

   Use for  Advantage

 

C

O

N

C

R

E

T

E

 Vault  Crack limitation
 Balk  Decrease of dimension
 Column  High resistance for dismantlement
 Industrial floor covering  Do not wear out after intensive use
 Foundation  Decrease of dilatation joint
 Cell concrete  No cracks

 

4. Industrial Cement

Calculation diagram press resistance concrete

 

Diagram press resistance of the concrete PB.

This depends of the color variation VB en consistence.

 

 

This concrete mixed with water forms a homogeneous mass and is the active component who mixed all components and bring it together to an inert material.

 

5. Vermiculita

Vermiculita is a very light and mineral product with a high insulation, thermic and acoustic value.

The composition of concrete have a normal weight between 2,3 and 2,5 ton/m³

The composition of concrete mixed with vermiculita have a weight between 0,4 and 1,8 ton/m³

The most important quality are the lighter weights who coherent on this constructive system gives an extraordenary result. With this mineral product who not deforms there is the advantage to avoid cracking like the actual porous concrete.

The weight of the mass is 110 kg/m³ and the granulation is between 1 and 3 mm.

 

The whole composition gives us the result of a building block with a big size and a high resistance (+/- 30 Ton)